LOA 41m (134.5ft)
Beam 7.7m (25.3ft)
Draft 2.4m (7.9ft)
Gross Tonnage 310
Range 1,100 nm
Class ABS + A1 Yachting Service AMS
Exterior Designer Carlo Galeazzi
Interior Designer Cristiano Gatto Design
Construction Hull - GRP, Superstructure - GRP, Deck - Teak
Crew 8
Guests 11
Cabins 5 cabins (2 × double, 1 × twin, 2 × single, 3 × additional berths)
Propulsion Twin screw diesel yacht
She is a 41m (134.5ft) motor yacht built by Canteri di Pisa shipyard in Italy and delivered in 2009. She was designed by Carlo Galeazzi, and she is one of only two Akhir 41 models. Built in GRP to ABS + A1 Yachting Service AMS classification, her semi- displacement hull and two 3,648hp MTU diesel engines serve up 24 knots when maxed
out, and an easier 18 knots for cruising. She has a range of 1,100nm at her most economical speed of 10 knots.
Cristiano Gatto Design takes credit for her layout and design. There is accommodation for 11 guests in five cabins with en suites, including a large, full-width master cabin located aft on the lower deck with an open plan office. You will find in-and-outdoor dining and lounge spaces, with floor-to-ceiling glass doors that create a natural flow. She is also equipped with Traz zero speed stablisation and Condaria air conditioning to ensure comfort on board.
Externally, she has teak decks throughout, and astern is a full-width, teak-laid swim platform which comes into its own at anchor. In her transom you will also find her tender garage and hydraulic lift for her two tenders: Ribline 4.8m (15.7ft) petrol jet tender and 2.2m (7.2ft) rescue tender with 9.9hp outboard.
She has space for eight crew, an excellent galley and well-equipped bridge - when docking, the Hydrosystem BT80 bow thrusters are invaluable. This is a well maintained yacht ready for a new owner to embark on the next chapter.
Equipment
4.8m Ribline petrol jet tender
2.2m Ribline rescue tender with 9.9 HP outboard
High speed yacht with maximum speed of 24 knots
Range of 1,100nm
Accommodation for 11 guests in five cabins
Interior design by Cristiano Gatto
Beam 7.7m (25.3ft)
Draft 2.4m (7.9ft)
Gross Tonnage 310
Range 1,100 nm
Class ABS + A1 Yachting Service AMS
Exterior Designer Carlo Galeazzi
Interior Designer Cristiano Gatto Design
Construction Hull - GRP, Superstructure - GRP, Deck - Teak
Crew 8
Guests 11
Cabins 5 cabins (2 × double, 1 × twin, 2 × single, 3 × additional berths)
Propulsion Twin screw diesel yacht
She is a 41m (134.5ft) motor yacht built by Canteri di Pisa shipyard in Italy and delivered in 2009. She was designed by Carlo Galeazzi, and she is one of only two Akhir 41 models. Built in GRP to ABS + A1 Yachting Service AMS classification, her semi- displacement hull and two 3,648hp MTU diesel engines serve up 24 knots when maxed
out, and an easier 18 knots for cruising. She has a range of 1,100nm at her most economical speed of 10 knots.
Cristiano Gatto Design takes credit for her layout and design. There is accommodation for 11 guests in five cabins with en suites, including a large, full-width master cabin located aft on the lower deck with an open plan office. You will find in-and-outdoor dining and lounge spaces, with floor-to-ceiling glass doors that create a natural flow. She is also equipped with Traz zero speed stablisation and Condaria air conditioning to ensure comfort on board.
Externally, she has teak decks throughout, and astern is a full-width, teak-laid swim platform which comes into its own at anchor. In her transom you will also find her tender garage and hydraulic lift for her two tenders: Ribline 4.8m (15.7ft) petrol jet tender and 2.2m (7.2ft) rescue tender with 9.9hp outboard.
She has space for eight crew, an excellent galley and well-equipped bridge - when docking, the Hydrosystem BT80 bow thrusters are invaluable. This is a well maintained yacht ready for a new owner to embark on the next chapter.